SS 317L Socket weld Elbow, UNS S31703 Stainless Steel Socket weld Cap

ASTM A182 Stainless Steel 317L Socket weld Elbow, 317L SS Socket weld Cap Manufacturer and Suppliers in Mumbai, SS WERKSTOFF NR. 1.4438 Socketweld Tee Exporter in India, SS UNS S31703 Socketweld Coupling Exporter, 317L SS Forged Socket weld 90deg. Elbow, SS 317L Socket Weld Cross, Stainless Steel 317L Socket Weld Fittings,ASME SA182M SS 317L Socket weld Tee, SS 317L Socket weld Pipe Elbow.

Table of Content

What is Stainless Steel 317L Socketweld Fittings

Specification of Stainless Steel 317L Socketweld Fittings

Equivalent Grade of Stainless Steel 317L Socketweld Fittings

Chemical Composition of Stainless Steel 317L Socketweld Fittings

Applications and Uses of Stainless Steel 317L Socketweld Fittings

Packaging of Stainless Steel 317L Socketweld Fittings

Testing of Stainless Steel 317L Socketweld Fittings

People also Search For Stainless Steel 317L Socketweld Fittings

Export Destinations

Domestic Supply

Silicon Steels is one of the leading manufacturers and suppliers of Stainless Steel 317l Socket weld Fittings. This product is offered at very cheap rates to both our global and domestic customers. The Stainless Steel 317L Socket weld Fittings is a chrome-nickel austenitic alloy that also contains molybdenum. These Socket weld Fittings are produced with both national and international quality materials customized to our customers ' demands.

Alloy 317L (UNS S31703) is an austenitic chromium-nickel-molybdenum stainless steel with low carbon corrosion resistant grade. In highly corrosive environments with sulfuric media, chlorides, and other halides, the alloy provides better resistance to 317L.In a wide range of chemicals, 317L is of excellent corrosion strength, especially in environments of acidic chloride. In comparison to 317L stainless steel, increased levels of chromium, nickel, and molybdenum improve their chloride resistance and corrosion. With the content of molybdenum alloy, resistance increases. 317L is resistant until 5 percent at temperatures of 120 ° F (49 ° C). Sulfuric acid levels are up to 5 percent. This alloy offers excellent resistance to higher-concentration solutions at temperatures below 100 ° F ( 38 ° C).

stainless steel 317l socketweld fittings supplier stockist

SS 317L SW Laterial Tee, SS 317L Socket weld Plug, SS WERKSTOFF NR. 1.4438 Socketweld Tee Exporter in India, SS UNS S31703 Socketweld Coupling Exporter, 317L SS Forged Socket weld 90deg. Elbow,ASME SA182M SS 317L Socket weld Tee, Stainless Steel 317L Socket Weld Fittings, ASME 16.11 Socket Weld Fittings, 317L SS Socket weld Cap Manufacturer and Suppliers in Mumbai, Stainless Steel 317L Class 6000 Socket Weld Fittings Supplier in India, Stainless Steel 317L Socket Weld Union Exporter, 317L SS Socket weld Equal Tee, ASTM A182 Stainless Steel 317L Socket weld Elbow, SS 317L Socket weld Pipe Elbow, SS 317L Socket Weld Cross.

Error testing includes the test of strength, the eddy current test, the hard-ness test, PMI, the resistance test for corrosion.other analysis includes tensile test, the elongation test, and the corrosion test intergranular. When testing any mistakes in products, we eliminate them. The third party also visually verify and approve the product for errors. The product can not be dispatched without their approval. We ensure that quality control and quality assurance are performed carefully. When they receive our services, the customer is satisfied, and we take into account that if our customers raise problems or complaints, we work on improving our services. We pack the material into the best, safe, and durable packaging material. Polybags, wooden boxes or pallets are the packaging material used..

It is available in type of Cap Screw, Screws, Socket Screw, Nuts, Studs,Eye Bolt, Socket Head Cap Screw, Bolts, Hexagon Nut, Nut, Wing Screw, Sockets, Stud Bolts, Marine Anchors, Hex Head Bolts, Square Nut, J Bolts, Spring Washers, T-Head Bolts, Anchors,Screw, Machine Screw, Hex Nut,Structural Bolts, Hex Coupling Nut, Hex Domed Cap Nuts, Washers, Wing Screw, Anchor Bolt,U- Bolts, Foundation Bolts, Hex Set Screw, Studs, Mushroom Head Square Neck Bolts, Pan Head Screw, Allen Cap screw, Socket Hexagon Head Screw.

Specification :

Specifications	ASTM A182 & ASME SA182
Dimension Standard	ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size Range	1/8" NB to 4" NB (Socketweld & Screwed-Threaded)
Class	2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type	Socketweld Fittings, Screwed-Threaded Fittings
Forged Fittings Items	45 Deg Elbow, 90 Deg Elbow, Forged Tee, Union, Full Coupling, Half Coupling, Cross, Cap, Swage Nipple, Plug, Bush, Welding Boss, Hexagonal Nipple etc

Types of Stainless Steel 317L Socketweld Fittings :

ASTM A2182 Stainless Steel 317L Bush S31703 Stainless Steel class 3000# Bush	SS 317L class 9000# Bush SS 317L Bush Werkstoff Nr. 1.4438 Bush	UNS S31703 Bush JIS SUS 317L Bush EN X2Crnimo18-16-4 Bush
ASTM A2182 Stainless Steel 317L CAP S31703 Stainless Steel class 3000# CAP	SS 317L class 9000# CAP SS 317L CAP Werkstoff Nr. 1.4438 CAP	UNS S31703 CAP JIS SUS 317L CAP EN X2Crnimo18-16-4 CAP
ASTM A2182 Stainless Steel 317L Cross S31703 Stainless Steel class 3000# Cross	SS 317L class 9000# Cross SS 317L Cross Werkstoff Nr. 1.4438 Cross	UNS S31703 Cross JIS SUS 317L Cross EN X2Crnimo18-16-4 Cross
ASTM A2182 Stainless Steel 317L Elbow S31703 Stainless Steel class 3000# Elbow	SS 317L class 9000# Elbow SS 317L Elbow Werkstoff Nr. 1.4438 Elbow	UNS S31703 Elbow JIS SUS 317L Elbow EN X2Crnimo18-16-4 Elbow
ASTM A2182 Stainless Steel 317L Elbolet S31703 Stainless Steel class 3000# Elbolet	SS 317L class 9000# Elbolet SS 317L Elbolet Werkstoff Nr. 1.4438 Elbolet	UNS S31703 Elbolet JIS SUS 317L Elbolet EN X2Crnimo18-16-4 Elbolet
ASTM A2182 Stainless Steel 317L Nipolet S31703 Stainless Steel class 3000# Nipolet	SS 317L class 9000# Nipolet SS 317L Nipolet Werkstoff Nr. 1.4438 Nipolet	UNS S31703 Nipolet JIS SUS 317L Nipolet EN X2Crnimo18-16-4 Nipolet
ASTM A2182 Stainless Steel 317L Plug S31703 Stainless Steel class 3000# Plug	SS 317L class 9000# Plug SS 317L Plug Werkstoff Nr. 1.4438 Plug	UNS S31703 Plug JIS SUS 317L Plug EN X2Crnimo18-16-4 Plug
ASTM A2182 Stainless Steel 317L Sokolet S31703 Stainless Steel class 3000# Sokolet	SS 317L class 9000# Sokolet SS 317L Sokolet Werkstoff Nr. 1.4438 Sokolet	UNS S31703 Sokolet JIS SUS 317L Sokolet EN X2Crnimo18-16-4 Sokolet
ASTM A2182 Stainless Steel 317L Tee S31703 Stainless Steel class 3000# Tee	SS 317L class 9000# Tee SS 317L Tee Werkstoff Nr. 1.4438 Tee	UNS S31703 Tee JIS SUS 317L Tee EN X2Crnimo18-16-4 Tee
ASTM A2182 Stainless Steel 317L Thredolet S31703 Stainless Steel class 3000# Thredolet	SS 317L class 9000# Thredolet SS 317L Thredolet Werkstoff Nr. 1.4438 Thredolet	UNS S31703 Thredolet JIS SUS 317L Thredolet EN X2Crnimo18-16-4 Thredolet
ASTM A2182 Stainless Steel 317L Union S31703 Stainless Steel class 3000# Union	SS 317L class 9000# Union SS 317L Union Werkstoff Nr. 1.4438 Union	UNS S31703 Union JIS SUS 317L Union EN X2Crnimo18-16-4 Union
ASTM A2182 Stainless Steel 317L Weldolet S31703 Stainless Steel class 3000# Weldolet	SS 317L class 9000# Weldolet SS 317L Weldolet Werkstoff Nr. 1.4438 Weldolet	UNS S31703 Weldolet JIS SUS 317L Weldolet EN X2Crnimo18-16-4 Weldolet

Equivalent Grade :

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
SS 317L	1.4438	S31703	SUS 317L	–	–	–	X2CrNiMo18-15-4

Chemical Composition :

Grade		C	Mn	Si	P	S	Cr	Mo	Ni	N
317L	min.	–	–	–	–	–	18.0	3.0-4.0	11.0	–
317L	max.	0.08	2.0	1.0	0.040	0.030	20.0	3.0-4.0	15.0	–

Socket Weld Pipe Fittings Dimension

DN	Nom. Pipe Size	Center to End Elbows.Tees.Cross A			Center to End 45° Elbow C			Outside Diameter of Band H			Minumum Wall Thickness G			Length of Thread. Min.(1)
DN	Nom. Pipe Size	2000	3000	6000	2000	3000	6000	2000	3000	6000	2000	3000	6000	B	L2
6	1/8	21	21	25	17	17	19	22	22	25	3.18	3.18	6.35	6.4	6.7
8	1/4	21	25	28	17	19	22	22	25	33	3.18	3.30	6.60	8.1	10.2
10	3/8	25	28	33	19	22	25	25	33	38	3.18	3.51	6.98	9.1	10.4
15	1/2	28	33	38	22	25	28	33	38	46	3.18	4.09	8.15	10.9	13.6
20	3/4	33	38	44	25	28	33	38	46	56	3.18	4.32	8.53	12.7	13.9
25	1	38	44	51	28	33	35	46	56	62	3.68	4.98	9.93	14.7	17.3
32	1-1/4	44	51	60	33	35	43	56	62	75	3.89	5.28	10.59	17.0	18.0
40	1-1/2	51	60	64	35	43	44	62	75	84	4.01	5.56	11.07	17.8	18.4
50	2	60	64	83	43	44	52	75	86	102	4.27	7.14	12.09	19.0	19.2
65	2-1/2	76	83	95	52	52	64	92	102	121	5.61	7.65	15.29	23.6	28.9
85	3	86	95	106	64	64	79	109	121	146	5.99	8.84	16.64	25.9	30.5
100	4	106	114	114	79	79	79	146	152	152	6.55	11.18	18.67	27.7	33.0

DN	Nom. Pipe Size	End to End Couplings W	End to End Caps P		Outside Diameter D		End Wall Thickness G Min.		Length of Thread. Min.(1)
DN	Nom. Pipe Size	3000&6000	3000	6000	3000	6000	3000	6000	B	L2
6	1/8	32	19	…	16	22	4.8	…	6.4	6.7
8	1/4	35	25	27	19	25	4.8	6.4	8.1	10.2
10	3/8	38	25	27	22	32	4.8	6.4	9.1	10.4
15	1/2	48	32	33	28	38	6.4	7.9	10.9	13.6
20	3/4	51	37	38	35	44	6.4	7.9	12.7	13.9
25	1	60	41	43	44	57	9.7	11.2	14.7	17.3
32	1-1/4	67	44	46	57	64	9.7	11.2	17.0	18.0
40	1-1/2	79	44	48	64	76	11.2	12.7	17.8	18.4
50	2	86	48	51	76	92	12.7	15.7	19.0	19.2
65	2-1/2	92	60	64	92	108	15.7	19.0	23.6	28.9
80	3	108	65	68	108	127	19.0	22.4	25.9	30.5
100	4	121	68	75	140	159	22.4	28.4	27.7	33.0

Socketweld Fittings Weight Chart :

SIZE	A	B	QTY	WEIGHT
¼	0.81	0.88	160	0.20
⁄	0.97	1.00	130	0.26
½	1.12	1.31	100	0.57
¾	1.31	1.5	75	0.71
1	1.5	1.81	40	1.08
1 ¼	1.75	2.19	25	1.68
1 ½	2.00	2.44	18	2.38
2	2.38	2.97	10	3.55
2 ½	3.00	3.62	4	6.22
3	3.38	4.31	2	10.36
4	4.19	5.75	1	23.91

Stainless Steel Socketweld Fittings Size Chart :

NPS	Minimum Length of Thread		Outside Diameter of Band D	Center to End A	Minimum Wall Thickness
NPS	B	J	Outside Diameter of Band D	Center to End A	Minimum Wall Thickness
1/2	10.9	13.6	33	28	3.18
3/4	12.7	13.9	38	33	3.18
1	14.7	17.3	46	38	3.68
1 ¼	17	18	56	44	3.89
1 ½	17.8	18.4	62	51	4.01
2	19	19.2	75	60	4.27
2 ½	23.6	28.9	92	76	5.61
3	25.9	30.5	109	86	5.99
4	27.7	33	146	106	6.55

Socketweld Fittings Size Chart

Normal Pipe Sizes	Min. Length of Thread		O.D> of Band D	Center to End A	Min. Wall Thick.
Normal Pipe Sizes	B	J	O.D> of Band D	Center to End A	Min. Wall Thick.
1/2	10.9	13.6	33	28	3.18
3/4	12.7	13.9	38	33	3.18
1	14.7	17.3	46	38	3.68
1 ¼	17	18	56	44	3.89
1 ½	17.8	18.4	62	51	4.01
2	19	19.2	75	60	4.27
2 ½	23.6	28.9	92	76	5.61
3	25.9	30.5	109	86	5.99
4	27.7	33	146	106	6.55

NPT Fittings Dimensions

Thread Of NPT Size And Pitch	Dash Size	Thread Male Minor Outside Daimeter		Female ID Thread
inches – TPI		millimeter	inches	millimeter	inches
1/8 – 27	-02	9,9	0.39	8,4	0.33
1/4 – 18	-04	13,2	0.52	11,2	0.44
3/8 – 18	-06	16,6	0.65	14,7	0.58
1/2 – 14	-08	20,6	0.81	17,8	0.70
3/4 – 14	-12	26,0	1.02	23,4	0.92
1 – 11.1/2	-16	32,5	1.28	29,5	1.16
1.1/4 – 11.1/2	-20	41,2	1.62	38,1	1.50
1.1/2 – 11.1/2	-24	47,3	1.86	43,9	1.73
2 – 11.1/2	-32	59,3	2.33	56,4	2.22
2.1/2 – 8	-40	71,5	2.82	69,1	2.72
3 – 8	-48	87,3	3.44	84,8	3.34

BSP Fittings Dimensions

Bspp And Bspt Pitch And Size	Dash Size	Bspt Male Thread Outside Daimeter		Bspp Male THREAD Outside Daimeter		Bspt Female Thread Inside Daimeter		Bspt Female Thread Inside Daimeter
inches – TPI		millimeter	inches	millimeter	inches	millimeter	inches	millimeter	inches
1/8 – 28	-02	9,5	0.37	9,6	0.38	8,4	0.33	8,6	0.34
1/4 – 19	-04	12,8	0.50	13,0	0.51	11,2	0.44	11,9	0.47
3/8 – 19	-06	16,3	0.64	16,5	0.65	14,7	0.59	15,2	0.60
1/2 – 14	-08	20,4	0.80	20,8	0.82	18,3	0.72	19,1	0.75
5/8 – 14	-10	22,5	0.89	22,8	0.90	20,6	0.81	20,8	0.82
3/4 – 14	-12	25,9	1.02	26,3	1.04	23,9	0.94	24,6	0.97
1 – 11	-16	32,6	1.28	33,1	1.30	29,7	1.17	30,7	1.21
1.1/4 – 11	-20	41,1	1.62	41,8	1.64	38,6	1.52	39,4	1.55
1.1/2 – 11	-24	47,0	1.85	47,7	1.88	44,5	1.75	45,5	1.79
2 -11	-32	58,6	2.31	59,5	2.34	56,4	2.22	57,4	2.26
2.1/2 – 11	-40	74,1	2.92	75,1	2.95	71,9	2.83	72,6	2.86
3 – 11	-48	86,6	3.41	87,9	3.46	84,6	3.33	85,4	3.36

Tolerance Chart Of Screwed Fittings

ANSI B16.11 American Standard Dimensional Tolerances
"A" - Threaded Center To Bottom	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"B" - Threaded Bore Diameter	For Size 1-1/2" And Smaller	+ 0.020" - 0.000"
"B" - Threaded Bore Diameter	2", 2-1/2", 3" And 4"	+ 0.025" - 0.000"
"C" - Threaded Wall Thick.	Min. = 1.09 T (But Not Less Than 5/32") T = Wall Thickness Of Nominal Pipe Sizes
"D" - Bore Diameter Of Pipe Fitting	For Size 2" And Smaller	± 0.030"
"D" - Bore Diameter Of Pipe Fitting	2-1/2", 3" And 4"	± 0.060"
"E" - Threadeds- Bottom To Bottom - Full Couplings	For Size 1/8" And 1/4"	± 0.06"
	3/8", 1/2" And 3/4"	± 0.12"
	1", 1-1/4", 1-1/2" And 2"	± 0.16"
	2-1/2", 3", And 4"	± 0.20"
"F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings	For Size 1/8" And 1/4"	± 0.03"
	3/8", 1/2" And 3/4"	± 0.06"
	1", 1-1/4", 1-1/2" And 2"	± 0.08"
	2-1/2", 3", And 4"	± 0.10"
"G" - Gap Of Welding	Approx. 0.06" Before Welding Recommended Gap
"H" - Min. Flat	Min. Flat = 0.75 X Min. Threaded Wall Thick.

Prices of Socketweld Fittings :

Socket Weld 90° Elbow
$74.00

Socket Weld 45° Elbow
$95.00

Socket Weld Tee
$12.00

Socket Weld Cross
$18.00

Socket Weld Full Coupling
$23.00

Socket Weld Half Coupling
$ 85.00

Socket Weld Pipe Cap
$14.00

Socket Weld Union
$36.00

Socket Weld Reducer Insert
$32.00

Socket Weld Boss
$36.00

Socket Weld Branch Outlet
$25.00

Socket Weld 90° Elbow Outlet
$74.00

Socket Weld 45° Lateral Tee
$95.00

Socket Weld Lateral Outlet
$41.00

Socket Weld Unequal Tee
$32.00

Socket Weld Equal Tee
$14.00

Socket weld Reducers
$32.00

Socket Weld Nipple Branch Outlet Bevel / Plain Ends

Socket Weld Pipe Nipple
$14.00

Socket Weld Adapters
$24.00

Threaded 90° Elbow
$23.00

Threaded Lateral Tee
$32.00

Threaded 45° Elbow
$13.00

Threaded Tee
$15.00

Threaded Cross
$19.00

Threaded Full Coupling
$22.00

Threaded Half Coupling
$37.00

Threaded Reducing Coupling
$52.00

Threaded Pipe Cap
$44.00

Threaded Bushing
$30.00

Threaded Hex Plug
$22.00

Threaded Square Head Plug
$33.00

Threaded 90° Outlet Elbow
$11.00

Threaded Union
$15.00

Threaded Hex Nipple
$53.00

Threaded Street Elbow
$10.00

Threaded Bull Plug
$23.00

Threaded Boss
$56.00

Threaded Swage Nipple
$22.00

Threaded Pipe Nipple
$12.00

Threaded Adapter
$20.00

Threaded Branch Outlet
$30.00

Threaded Reducing Tee
$42.00

Applications :

These material are not a single material but the name for a family of corrosion resistant steels. Like many scientific breakthrough the origins of stainless steel lies in a lucky accident. From the smallest part of zipper to the largest building skyscraper, stainless steel is an essential part of modern life.Stainless steel’s strength, resistance to corrosion and low maintenance make it the ideal material for a wide range of applications. It is also has a long life cycle and is 100% recyclable.

Packaging Used By Us :

We ship our stainless steel metal products in industry leading packaging designed to ensure your order reaches its destination safely. We offer multiple packaging options to meet your specific requirements. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. We pack our goods in numerous ways based on the products. We pack our products in multiple ways.

Testing Used By Us :

To specify the various physical and mechanical properties of the finished product, various tests, both destructive and nondestructive, are performed. Metallurgical, hardness, hardenability, tension, ductility, compression, fatigue, impact, wear, corrosion, creep, machinability, radiography, magnetic particle, ultrasonic, and eddy current are some of the major tests that are performed by quality control personnel. Metallurgical testing is used to determine the quality of steel by analyzing the microstructure of a sample under a microscope. A cross section of a sample is first highly polished and then examined at a magnification from 100-500 diameters. The microstructure of steel consists of grains of different compositions and sizes.

People Also Search For

Export Destinations

Domestic Supply

ss 317L socket weld pipe fittings dimensions, 317L socketwekd pipe fitting dimensions, 317L ss forged fittings definition, 317L ss class 300 fittings pressure rating, drop forging process, ss 317L forged fittings price list, asme b16.11 fittings, ss 317L forged fittings price, 317L socket weld fittings dimensions pdf, steel pipe fitting dimensions chart,ss 317L class 3000 fittings pressure rating, 150# stainless steel 317L socket weld fittings, hot forging process, forged steel 317L fittings, 317L ss class 3000 pipe fittings pressure rating, ansi 3000 pressure rating, b16.11 pressure rating, ss 317L forging process, forged fittings definition, stainless steel 317L socket weld fittings, class 6000 fittings, asme b16.11 class 3000, class 9000 fittings pressure rating, ss 317L pipe coupling dimensions, 3000 lb stainless steel 317L forged fittings.

Singapore, Jordan, Indonesia, South Africa, Malaysia, South America, Mozambique, Austria, Kuwait, Australia, Trinidad and Tobago, Hong Kong, London, Spain, New Zealand, Ibadan, Durban, Brazzaville, Kolwezi, Brazil, Benin, Maputo, Algiers, Conakry, Maiduguri, Kaduna, Cairo, Sri Lanka, Yaoundé, UK, Peru, Vietnam, Azerbaijan, Austalia, Nigeria, Uganda, Casablanca, Dubai, Mbuji-Mayi, Algeria, Yemen, Nairobi, Lebanon, Angola, Zaria, UAE, Ghana, Mozabique, Colombo, Johannesburg, Canada, Lubumbashi, Ouagadougou, Phillipine, Antananarivo, Chine, Myanmar, Kinshasa, Mogadishu, Addis Ababa, Abidjan, Tripoli, Cape Town, Dar es Salaam, Russia, Giza, Pretoria, Morocco, Africa, Port Elizabeth, Luanda, Bahrain, United States, Accra, Port Harcourt, Houston, Alexandria, Oman, Sudan, Turkey, Fez, Ethiopa, Freetown, Douala, Khartoum, Germany, Subra al-Haymah, Cyprus, Thailand (Bangkok), Iran, Israel, Mexico, Tunisia, Qatar, Bangladesh, Dakar, Lagos, Rabat, Abu Dhabi, Bamako, Colombia, Omdurman, Kampala, Bulawayo, Kano, Kazakhstan, Argentina, Saudi Arabia, Italy, Cameroon, Egypt, Jordon, Iraq, Venezuela, Harare, Soweto, Netherland, New York.

Amritsar, Gulbarga, Kerala, Kota, Andhra Pradesh, Delhi, Maharashtra, Pune, Bundi, Gorakhpur, Dombivali, Kasganj, Betul, Kolkata, Aurangabad, Vadodara, Durgapur, Punjab, Jabalpur, Tripura, Mizoram, Ballia, Tadepalligudem, Orissa, Amravati, Jaipur, Vijayawada, Gwalior, Pimpri and Chinchwad, Chandigarh, Siliguri, Gujarat, Bihar, Haryana, Manipur, Baraut, Nashik, Meerut, Allahabad, Coimbatore, Gujarat, Navi Mumbai, Bhadreswar, Bikaner, Saharanpur, Madurai, Visakhapatnam, Ambattur, Ludhiana, Kurnool, Dhanbad, Jharkhand, Ajmer, Benin, Kolapur, Chhattisgarh, Guntur, Bhavnagar, Vasai, India, Nagapattinam, Waghala, Ranchi, Akola, Kalyani, Ulhasnagar, Nagpur, Virar, Assam, Indore, Ujjain, Uttar Pradesh, Buxar, Loni, Thane, Dehradun, Nanded, Jhansi, Ghaziabad, Tamil Nadu, West Bengal, Ahmedabad, Blair, Mumbai, Karnataka, Sadar, Bangalore, Hubli and Dharwad, Tirunelveli, Solapur, Bhopal, Rajasthan, Lucknow, Chennai, Jodhpur, Muktsar, Mangalore, Udgir, Bansberia, Srinagar, Nagda, Miryalaguda, Surat, Suryapet, Guwahati, Patna, Agra, Rajkot, Madhya Pradesh, Hyderabad, Faridabad, Kalyan, Jamalpur, Puducherry, Kanpur, Varanasi, Jamnagar, Nagaur, Hinganghat, Datia, Haora, Bhiwadi, Belgaum, Port, Banswara, Raipur, Ambala, Asansol.

Table of Content