• sales@siliconsteelalloys.com
  • Mon - Fri: 10:00 AM - 6:00 PM
Enquiry Now

Titanium Grade 2 Socketweld Fittings

Gr.2 Titanium Alloy Socket weld Equal Tee, Gr.2 Titanium Forged Socket weld 90deg. Elbow, Titanium Grade 2 Socket weld Tee, Grade 2 Titanium Socketweld Cap Manufacturer and Suppliers In Mumbai , ASME SB381 Titanium Grade 2 Socket Weld Cross, Titanium UNS R50400 Socketweld Coupling Exporter, Titanium Gr.2 Class 6000 Socket Weld Fittings Supplier in India, Titanium Grade 2 Socket Weld Union Exporter, Titanium WERKSTOFF NR. 3.7035 Socketweld Fittings Exporter in India, Titanium Grade 2 Socketweld Plug, ASTM B381 Alloy Gr.2 Socketweld Elbow, Titanium Grade 2 SW Laterial Tee, Titanium Grade 2 Socket weld Pipe Elbow, Titanium Grade 2 Socket Weld Fittings, ASME 16.11 Titanium Socket Weld Fittings.


Socketweld Fittings

Table of Content

Silicon Steels is a well-known producer of Titanium Grade 2 Socketweld Fittings which is supplied into many industry sectors. We are one of the leading manufacturers of Titanium Grade 2 Socketweld fittings. We produce, supply and export to both domestic and foreign customers. The Socketweld Fittings are made available to customers in various types, sizes and shapes according to customer need.

Our Company strives to excellently meet all metal industry and customers' requirements in this area of manufacturing. We produce these Socketweld Fittings with national and global needs in mind. Before being shipped to the customer, the Socketweld fittings are consistency checked to different tests. Pure titanium alloys have small quantities of iron and oxygen affecting mechanical properties. The materials suitable for different applications are produced in any commercial grade. Grade 2 The most typically used and readily available form of unalloyed titanium is Unalloyed Ti ("Pure") 50A alloy. It's not a magnet. This alloy is approved in NACE MR-01-75 standard for the use of sour operation.


Socketweld Fittings Manufacturer
Socketweld Fittings Process
titanium grade 2 socketweld fittings supplier stockist

Titanium Gr.2 Class 6000 Socket Weld Fittings Supplier in India, Gr.2 Titanium Alloy Socket weld Equal Tee, Titanium Grade 2 SW Laterial Tee, Titanium Grade 2 Socket weld Pipe Elbow, Titanium UNS R50400 Socketweld Coupling Exporter, Titanium WERKSTOFF NR. 3.7035 Socketweld Fittings Exporter in India, ASME SB381 Titanium Grade 2 Socket Weld Cross, Titanium Grade 2 Socketweld Plug, ASME 16.11 Titanium Socket Weld Fittings, Grade 2 Titanium Socketweld Cap Manufacturer and Suppliers In Mumbai , Titanium Grade 2 Socket Weld Union Exporter, Gr.2 Titanium Forged Socket weld 90deg. Elbow, ASTM B381 Alloy Gr.2 Socketweld Elbow, Titanium Grade 2 Socket weld Tee, Titanium Grade 2 Socket Weld Fittings.

Grade 2 Unalloyed Ti ('Pure') 50A alloy is difficult to machine but can be used with slow speeds, coolant flows and high feed rates successfully. Grade 2 Ti Unalloyed (« Pure ») 50A alloy can be formed with power brake, hydro pressure, stretching or hammer-dripping methods by heating the material down to 704 ° C, and then holding for two hours, followed by an air-cooling cycle. Air-cooling methods can be used to manufacture tungsten carbide or cobalt-type high-speed machines. In case of an intermediate relief of pain, 482 ° C (900 ° F) should be heated for 45 minutes.

The check guarantees that the respective customers are not supplied with low quality or defective products. We do testing of a product like and macro, micro, pitting, chemical, mechanical analysis, flattening test and flaring test etc.

Specification :

Specifications ASTM B381 & ASME B381
Dimension Standard ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Size Range 1/8" NB to 4" NB (Socketweld & Screwed-Threaded)
Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type Socketweld Fittings, Screwed-Threaded Fittings
Forged Fittings Items 45 Deg Elbow, 90 Deg Elbow, Forged Tee, Union, Full Coupling, Half Coupling, Cross, Cap, Swage Nipple, Plug, Bush, Welding Boss, Hexagonal Nipple etc

Types of Titanium Grade 2 Socketweld Fittings :


Socketweld Fittings Bush
  • ASTM B363 Titanium Gr 2 Bush
    		•
  • ASME SB363 UNS R50400 class 3000# Bush
    		•
  • Werkstoff Nr. 3.7035 class 9000# Bush
    		•
    Socketweld Fittings CAP
  • ASTM B363 Titanium Gr 2 CAP
    		•
  • ASME SB363 UNS R50400 class 3000# CAP
    		•
  • Werkstoff Nr. 3.7035 class 9000# CAP
    		•
    Socketweld Fittings Cross
  • ASTM B363 Titanium Gr 2 Cross
    		•
  • ASME SB363 UNS R50400 class 3000# Cross
    		•
  • Werkstoff Nr. 3.7035 class 9000# Cross
    		•
    Socketweld Fittings Elbow
  • ASTM B363 Titanium Gr 2 Elbow
    		•
  • ASME SB363 UNS R50400 class 3000# Elbow
    		•
  • Werkstoff Nr. 3.7035 class 9000# Elbow
    		•
    Socketweld Fittings Elbolet
  • ASTM B363 Titanium Gr 2 Elbolet
    		•
  • ASME SB363 UNS R50400 class 3000# Elbolet
    		•
  • Werkstoff Nr. 3.7035 class 9000# Elbolet
    		•
    Socketweld Fittings Nipolet
  • ASTM B363 Titanium Gr 2 Nipolet
    		•
  • ASME SB363 UNS R50400 class 3000# Nipolet
    		•
  • Werkstoff Nr. 3.7035 class 9000# Nipolet
    		•
    Socketweld Fittings Plug
  • ASTM B363 Titanium Gr 2 Plug
    		•
  • ASME SB363 UNS R50400 class 3000# Plug
    		•
  • Werkstoff Nr. 3.7035 class 9000# Plug
    		•
    Socketweld Fittings Sockolet
  • ASTM B363 Titanium Gr 2 Sokolet
    		•
  • ASME SB363 UNS R50400 class 3000# Sokolet
    		•
  • Werkstoff Nr. 3.7035 class 9000# Sokolet
    		•
    Socketweld Fittings Tee
  • ASTM B363 Titanium Gr 2 Tee
    		•
  • ASME SB363 UNS R50400 class 3000# Tee
    		•
  • Werkstoff Nr. 3.7035 class 9000# Tee
    		•
    Socketweld Fittings Thredolet
  • ASTM B363 Titanium Gr 2 Thredolet
    		•
  • ASME SB363 UNS R50400 class 3000# Thredolet
    		•
  • Werkstoff Nr. 3.7035 class 9000# Thredolet
    		•
    Socketweld Fittings Union
  • ASTM B363 Titanium Gr 2 Union
    		•
  • ASME SB363 UNS R50400 class 3000# Union
    		•
  • Werkstoff Nr. 3.7035 class 9000# Union
    		•
    Socketweld Fittings Weldolet
  • ASTM B363 Titanium Gr 2 Weldolet
    		•
  • ASME SB363 UNS R50400 class 3000# Weldolet
    		•
  • Werkstoff Nr. 3.7035 class 9000# Weldolet
    		•

    Equivalent Grade :

    STANDARD WERKSTOFF NR. UNS
    Titanium Grade 2 3.7035 R50400

    Chemical Composition :

    Grade C N O H Ti Fe
    Titanium Gr 2 0.10 max 0.03 max 0.25 max 0.015 max bal 0.30 max

    Socket Weld Pipe Fittings Dimension

    socketweld fittings dimensions
    DN Nom.
    Pipe
    Size    		 Center to End
    Elbows.Tees.Cross
    A    		 Center to End
    45° Elbow
    C    		 Outside Diameter
    of Band
    H    		 Minumum Wall
    Thickness G    		 Length of 
    Thread.
    Min.(1)
    2000 3000 6000 2000 3000 6000 2000 3000 6000 2000 3000 6000 B L2
    6 1/8 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7
    8 1/4 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2
    10 3/8 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4
    15 1/2 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6
    20 3/4 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9
    25 1 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3
    32 1-1/4 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0
    40 1-1/2 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4
    50 2 60 64 83 43 44 52 75 86 102 4.27 7.14 12.09 19.0 19.2
    65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9
    85 3 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5
    100 4 106 114 114 79 79 79 146 152 152 6.55 11.18 18.67 27.7 33.0

    DN Nom.
    Pipe 
    Size    		 End to End
    Couplings 
    W    		 End to End
    Caps
    P    		 Outside 
    Diameter 
    D    		 End Wall 
    Thickness 
    G Min.    		 Length of 
    Thread.
    Min.(1)
    3000&6000 3000 6000 3000 6000 3000 6000 B L2
    6 1/8 32 19 … 16 22 4.8 … 6.4 6.7
    8 1/4 35 25 27 19 25 4.8 6.4 8.1 10.2
    10 3/8 38 25 27 22 32 4.8 6.4 9.1 10.4
    15 1/2 48 32 33 28 38 6.4 7.9 10.9 13.6
    20 3/4 51 37 38 35 44 6.4 7.9 12.7 13.9
    25 1 60 41 43 44 57 9.7 11.2 14.7 17.3
    32 1-1/4 67 44 46 57 64 9.7 11.2 17.0 18.0
    40 1-1/2 79 44 48 64 76 11.2 12.7 17.8 18.4
    50 2 86 48 51 76 92 12.7 15.7 19.0 19.2
    65 2-1/2 92 60 64 92 108 15.7 19.0 23.6 28.9
    80 3 108 65 68 108 127 19.0 22.4 25.9 30.5
    100 4 121 68 75 140 159 22.4 28.4 27.7 33.0

    Socketweld Fittings Weight Chart :

    SIZE A B QTY WEIGHT
    ¼ 0.81 0.88 160 0.20
    ⁄ 0.97 1.00 130 0.26
    ½ 1.12 1.31 100 0.57
    ¾ 1.31 1.5 75 0.71
    1 1.5 1.81 40 1.08
    1 ¼ 1.75 2.19 25 1.68
    1 ½ 2.00 2.44 18 2.38
    2 2.38 2.97 10 3.55
    2 ½ 3.00 3.62 4 6.22
    3 3.38 4.31 2 10.36
    4 4.19 5.75 1 23.91

    Stainless Steel Socketweld Fittings Size Chart :

    NPS Minimum Length
    of Thread    		 Outside Diameter
    of Band
    D    		 Center to End
    A    		 Minimum
    Wall Thickness
    B J
    1/2 10.9 13.6 33 28 3.18
    3/4 12.7 13.9 38 33 3.18
    1 14.7 17.3 46 38 3.68
    1 ¼ 17 18 56 44 3.89
    1 ½ 17.8 18.4 62 51 4.01
    2 19 19.2 75 60 4.27
    2 ½ 23.6 28.9 92 76 5.61
    3 25.9 30.5 109 86 5.99
    4 27.7 33 146 106 6.55

    Socketweld Fittings Size Chart

    Normal Pipe Sizes Min. Length
    of Thread    		 O.D>
    of Band
    D    		 Center to End
    A    		 Min.
    Wall Thick.
    B J
    1/2 10.9 13.6 33 28 3.18
    3/4 12.7 13.9 38 33 3.18
    1 14.7 17.3 46 38 3.68
    1 ¼ 17 18 56 44 3.89
    1 ½ 17.8 18.4 62 51 4.01
    2 19 19.2 75 60 4.27
    2 ½ 23.6 28.9 92 76 5.61
    3 25.9 30.5 109 86 5.99
    4 27.7 33 146 106 6.55

    NPT Fittings Dimensions

    Thread Of NPT
    Size And Pitch    		 Dash
    Size    		 Thread Male
    Minor Outside Daimeter    		 Female
    ID Thread
    inches – TPI millimeter inches millimeter inches
    1/8 – 27 -02 9,9 0.39 8,4 0.33
    1/4 – 18 -04 13,2 0.52 11,2 0.44
    3/8 – 18 -06 16,6 0.65 14,7 0.58
    1/2 – 14 -08 20,6 0.81 17,8 0.70
    3/4 – 14 -12 26,0 1.02 23,4 0.92
    1 – 11.1/2 -16 32,5 1.28 29,5 1.16
    1.1/4 – 11.1/2 -20 41,2 1.62 38,1 1.50
    1.1/2 – 11.1/2 -24 47,3 1.86 43,9 1.73
    2 – 11.1/2 -32 59,3 2.33 56,4 2.22
    2.1/2 – 8 -40 71,5 2.82 69,1 2.72
    3 – 8 -48 87,3 3.44 84,8 3.34

    BSP Fittings Dimensions

    Bspp And Bspt
    Pitch And Size    		 Dash
    Size    		 Bspt Male
    Thread Outside Daimeter    		 Bspp Male
    THREAD Outside Daimeter    		 Bspt Female
    Thread Inside Daimeter    		 Bspt Female
    Thread Inside Daimeter
    inches – TPI millimeter inches millimeter inches millimeter inches millimeter inches
    1/8 – 28 -02 9,5 0.37 9,6 0.38 8,4 0.33 8,6 0.34
    1/4 – 19 -04 12,8 0.50 13,0 0.51 11,2 0.44 11,9 0.47
    3/8 – 19 -06 16,3 0.64 16,5 0.65 14,7 0.59 15,2 0.60
    1/2 – 14 -08 20,4 0.80 20,8 0.82 18,3 0.72 19,1 0.75
    5/8 – 14 -10 22,5 0.89 22,8 0.90 20,6 0.81 20,8 0.82
    3/4 – 14 -12 25,9 1.02 26,3 1.04 23,9 0.94 24,6 0.97
    1 – 11 -16 32,6 1.28 33,1 1.30 29,7 1.17 30,7 1.21
    1.1/4 – 11 -20 41,1 1.62 41,8 1.64 38,6 1.52 39,4 1.55
    1.1/2 – 11 -24 47,0 1.85 47,7 1.88 44,5 1.75 45,5 1.79
    2 -11 -32 58,6 2.31 59,5 2.34 56,4 2.22 57,4 2.26
    2.1/2 – 11 -40 74,1 2.92 75,1 2.95 71,9 2.83 72,6 2.86
    3 – 11 -48 86,6 3.41 87,9 3.46 84,6 3.33 85,4 3.36

    Tolerance Chart Of Screwed Fittings

    ANSI B16.11 American Standard Dimensional Tolerances
    "A" - Threaded Center To Bottom For Size
    1/8" And 1/4"    		± 0.03"
    3/8", 1/2" And 3/4" ± 0.06"
    1", 1-1/4", 1-1/2" And 2" ± 0.08"
    2-1/2", 3", And 4" ± 0.10"
    "B" - Threaded Bore Diameter For Size
    1-1/2" And Smaller    		 + 0.020"
    - 0.000"
    2", 2-1/2", 3" And 4" + 0.025"
    - 0.000"
    "C" - Threaded Wall Thick. Min. = 1.09 T (But Not Less Than 5/32")
    T = Wall Thickness Of Nominal Pipe Sizes
    "D" - Bore Diameter Of Pipe Fitting For Size
    2" And Smaller    		± 0.030"
    2-1/2", 3" And 4" ± 0.060"
    "E" - Threadeds- Bottom To Bottom - Full Couplings For Size
    1/8" And 1/4"    		± 0.06"
    3/8", 1/2" And 3/4" ± 0.12"
    1", 1-1/4", 1-1/2" And 2" ± 0.16"
    2-1/2", 3", And 4" ± 0.20"
    "F" - Bottom Of Threaded To Opposite Face - ANSI B16.11 Half Couplings For Size
    1/8" And 1/4"    		± 0.03"
    3/8", 1/2" And 3/4" ± 0.06"
    1", 1-1/4", 1-1/2" And 2" ± 0.08"
    2-1/2", 3", And 4" ± 0.10"
    "G" - Gap Of Welding Approx. 0.06"
    Before Welding Recommended Gap
    "H" - Min. Flat Min. Flat = 0.75 X Min.
    Threaded Wall Thick.

    Prices of Socketweld Fittings :


    Socket Weld 90° Elbow

    Socket Weld 90° Elbow
    $74.00

    Socket Weld 45° Elbow

    Socket Weld 45° Elbow
    $95.00

    Socket Weld Tee

    Socket Weld Tee
    $12.00

    Socket Weld Cross

    Socket Weld Cross
    $18.00

    Socket Weld Full Coupling

    Socket Weld Full Coupling
    $23.00

    Socket Weld Half Coupling

    Socket Weld Half Coupling
    $ 85.00

    Socket Weld Pipe Cap

    Socket Weld Pipe Cap
    $14.00

    Socket Weld Union

    Socket Weld Union
    $36.00

    Socket Weld Reducer Insert

    Socket Weld Reducer Insert
    $32.00

    Socket Weld Boss

    Socket Weld Boss
    $36.00

    Socket Weld Branch Outlet

    Socket Weld Branch Outlet
    $25.00

    Socket Weld 90° Elbow Outlet

    Socket Weld 90° Elbow Outlet
    $74.00

    Socket Weld 45° Lateral Tee

    Socket Weld 45° Lateral Tee
    $95.00

    Socket Weld Lateral Outlet

    Socket Weld Lateral Outlet
    $41.00

    Socket Weld Unequal Tee

    Socket Weld Unequal Tee
    $32.00

    Socket Weld Equal Tee

    Socket Weld Equal Tee
    $14.00

    Socket weld Reducers

    Socket weld Reducers
    $32.00

    Socket Weld Nipple Branch Outlet Bevel / Plain Ends

    Socket Weld Pipe Nipple
    $14.00

    Socket Weld Adapters

    Socket Weld Adapters
    $24.00

    Threaded 90° Elbow

    Threaded 90° Elbow
    $23.00

    Threaded Lateral Tee

    Threaded Lateral Tee
    $32.00

    Threaded 45° Elbow

    Threaded 45° Elbow
    $13.00

    Threaded Tee

    Threaded Tee
    $15.00

    Threaded Cross

    Threaded Cross
    $19.00

    Threaded Full Coupling

    Threaded Full Coupling
    $22.00

    Threaded Half Coupling

    Threaded Half Coupling
    $37.00

    Threaded Reducing Coupling

    Threaded Reducing Coupling
    $52.00

    Threaded Pipe Cap

    Threaded Pipe Cap
    $44.00

    Threaded Hex Head Bushing

    Threaded Bushing
    $30.00

    Threaded Hex Head Plug

    Threaded Hex Plug
    $22.00

    Threaded Square Head Plug

    Threaded Square Head Plug
    $33.00

    Threaded 90° Elbow Outlet

    Threaded 90° Outlet Elbow
    $11.00

    Threaded Union

    Threaded Union
    $15.00

    Threaded Hex Nipple

    Threaded Hex Nipple
    $53.00

    Threaded Street Elbow

    Threaded Street Elbow
    $10.00

    Threaded Bull Plug

    Threaded Bull Plug
    $23.00

    Threaded Boss

    Threaded Boss
    $56.00

    Threaded Swage Nipple

    Threaded Swage Nipple
    $22.00

    Threaded Pipe Nipple

    Threaded Pipe Nipple
    $12.00

    Threaded Adapter

    Threaded Adapter
    $20.00


    Threaded Branch Outlet

    Threaded Branch Outlet
    $30.00

    Threaded Reducing Tee

    Threaded Reducing Tee
    $42.00





    Applications :

    These material are not a single material but the name for a family of corrosion resistant steels. Like many scientific breakthrough the origins of stainless steel lies in a lucky accident. From the smallest part of zipper to the largest building skyscraper, stainless steel is an essential part of modern life.Stainless steel’s strength, resistance to corrosion and low maintenance make it the ideal material for a wide range of applications. It is also has a long life cycle and is 100% recyclable.

    application of silicon steel

    Packaging Used By Us :

    packaging and uses of silicon steel

    We ship our stainless steel metal products in industry leading packaging designed to ensure your order reaches its destination safely. We offer multiple packaging options to meet your specific requirements. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. We pack our goods in numerous ways based on the products. We pack our products in multiple ways.


    Testing Used By Us :

    To specify the various physical and mechanical properties of the finished product, various tests, both destructive and nondestructive, are performed. Metallurgical, hardness, hardenability, tension, ductility, compression, fatigue, impact, wear, corrosion, creep, machinability, radiography, magnetic particle, ultrasonic, and eddy current are some of the major tests that are performed by quality control personnel. Metallurgical testing is used to determine the quality of steel by analyzing the microstructure of a sample under a microscope. A cross section of a sample is first highly polished and then examined at a magnification from 100-500 diameters. The microstructure of steel consists of grains of different compositions and sizes.

    Testing Used By Silicon steel
    • People Also Search For

    • Export Destinations

    • Domestic Supply

    Titanium Grade 2 b16.11 pressure rating, Titanium Gr.2 forging process, Titanium Gr.2 forged fittings definition, alloy Gr.2 socket weld fittings, Titanium Grade 2 socketwekd pipe fitting dimensions, asme b16.11 class 3000, Titanium Gr.2 class 300 fittings pressure rating, Titanium Gr.2 socket weld pipe fittings dimensions, class 9000 fittings pressure rating, forged steel alloy Grade 2 fittings, Titanium Grade 2 class 3000 fittings pressure rating, asme b16.11 fittings, Titanium Grade 2 forged fittings price list, Titanium Gr.2 ansi 3000 pressure rating, alloy Grade 2 steel pipe fitting dimensions chart, Titanium Gr.2 socket weld fittings dimensions pdf, Titanium Gr.2 pipe coupling dimensions, 3000 lb Titanium Gr.2 forged fittings, class 6000 fittings, Titanium Grade 2 forged fittings definition, 150# Titanium Grade 2 socket weld fittings, Titanium Grade 2 forged fittings price, Titanium Grade 2 class 3000 pipe fittings pressure rating.

    Singapore, Jordan, Indonesia, South Africa, Malaysia, South America, Mozambique, Austria, Kuwait, Australia, Trinidad and Tobago, Hong Kong, London, Spain, New Zealand, Ibadan, Durban, Brazzaville, Kolwezi, Brazil, Benin, Maputo, Algiers, Conakry, Maiduguri, Kaduna, Cairo, Sri Lanka, Yaoundé, UK, Peru, Vietnam, Azerbaijan, Austalia, Nigeria, Uganda, Casablanca, Dubai, Mbuji-Mayi, Algeria, Yemen, Nairobi, Lebanon, Angola, Zaria, UAE, Ghana, Mozabique, Colombo, Johannesburg, Canada, Lubumbashi, Ouagadougou, Phillipine, Antananarivo, Chine, Myanmar, Kinshasa, Mogadishu, Addis Ababa, Abidjan, Tripoli, Cape Town, Dar es Salaam, Russia, Giza, Pretoria, Morocco, Africa, Port Elizabeth, Luanda, Bahrain, United States, Accra, Port Harcourt, Houston, Alexandria, Oman, Sudan, Turkey, Fez, Ethiopa, Freetown, Douala, Khartoum, Germany, Subra al-Haymah, Cyprus, Thailand (Bangkok), Iran, Israel, Mexico, Tunisia, Qatar, Bangladesh, Dakar, Lagos, Rabat, Abu Dhabi, Bamako, Colombia, Omdurman, Kampala, Bulawayo, Kano, Kazakhstan, Argentina, Saudi Arabia, Italy, Cameroon, Egypt, Jordon, Iraq, Venezuela, Harare, Soweto, Netherland, New York.

    Amritsar, Gulbarga, Kerala, Kota, Andhra Pradesh, Delhi, Maharashtra, Pune, Bundi, Gorakhpur, Dombivali, Kasganj, Betul, Kolkata, Aurangabad, Vadodara, Durgapur, Punjab, Jabalpur, Tripura, Mizoram, Ballia, Tadepalligudem, Orissa, Amravati, Jaipur, Vijayawada, Gwalior, Pimpri and Chinchwad, Chandigarh, Siliguri, Gujarat, Bihar, Haryana, Manipur, Baraut, Nashik, Meerut, Allahabad, Coimbatore, Gujarat, Navi Mumbai, Bhadreswar, Bikaner, Saharanpur, Madurai, Visakhapatnam, Ambattur, Ludhiana, Kurnool, Dhanbad, Jharkhand, Ajmer, Benin, Kolapur, Chhattisgarh, Guntur, Bhavnagar, Vasai, India, Nagapattinam, Waghala, Ranchi, Akola, Kalyani, Ulhasnagar, Nagpur, Virar, Assam, Indore, Ujjain, Uttar Pradesh, Buxar, Loni, Thane, Dehradun, Nanded, Jhansi, Ghaziabad, Tamil Nadu, West Bengal, Ahmedabad, Blair, Mumbai, Karnataka, Sadar, Bangalore, Hubli and Dharwad, Tirunelveli, Solapur, Bhopal, Rajasthan, Lucknow, Chennai, Jodhpur, Muktsar, Mangalore, Udgir, Bansberia, Srinagar, Nagda, Miryalaguda, Surat, Suryapet, Guwahati, Patna, Agra, Rajkot, Madhya Pradesh, Hyderabad, Faridabad, Kalyan, Jamalpur, Puducherry, Kanpur, Varanasi, Jamnagar, Nagaur, Hinganghat, Datia, Haora, Bhiwadi, Belgaum, Port, Banswara, Raipur, Ambala, Asansol.