Inconel 625 Buttweld Fittings, ASTM B168 Inconel UNS N06625 Buttweld Reducer Suppliers

625 Alloy ANSI B16.9 Short & Long Radius Elbow, Alloy Grade 625 Butt weld Pipe Fittings Stockists in Mumbai, Alloy 625 Pipe Fittings, Chronin® 625 Pipe Fittings, 625 Inconel Alloy 45°/90°/180° Butt weld Elbow, ASTM B366 Inconel 625 Pipe Elbow, UNS N06625 Nickel Alloy Butt weld Seamless Pipe Fitting, ASME B16.28 625 Inconel® Alloy Butt weld Reducing Tee, 625 Inconel Alloy Butt weld Pipe Fittings, Distributors of Inconel® 625 ASME SB366 Buttweld Reducer, Inconel 625 Equal Tee Wholesaler, Altemp® 625 Butt weld Fittings, 625 Inconel® Buttweld Tee Dealer, 625 Inconel Welded Pipe Fittings Suppliers, Haynes® 625 Butt weld Fittings, Inconel® Alloy 625 Buttweld Fittings, 625 Inconel® Unequal Cross Exporters, Nickel Alloy 625 Pipe Fittings Suppliers.

Table of Content

What is Inconel 625 Buttweld Fittings

Specification of Inconel 625 Buttweld Fittings

Equivalent Grade of Inconel 625 Buttweld Fittings

Chemical Composition of Inconel 625 Buttweld Fittings

Applications and Uses of Inconel 625 Buttweld Fittings

Packaging of Inconel 625 Buttweld Fittings

Testing of Inconel 625 Buttweld Fittings

People also Search For Inconel 625 Buttweld Fittings

Export Destinations

Domestic Supply

Stainless Steel UNS NO 30400 Cold Rolled Slits presentations amazing utilization restriction and has a high effortlessness of creation, striking formability. Werkstoff No 1.4301 hot rolled Strips austenitic treated steels are similarly seen as the most weldable of the high-composite steels and can be welded by all mix and restriction welding frames.

inconel 625 buttweld fittings supplier stockist

Ferrochronin® 625 Pipe Fittings, 625 Inconel® Concentric Reducer, Inconel® JIS NCF 625 Stub Ends Exporters, Nicrofer® 6020 Seamless and Welded Pipe Fittings, MSS SP-79 Inconel 625 End Pipe Cap Suppliers, Nickelvac® 625 Butt weld Pipe Fittings, Inconel Alloy 625 MSS-SP-43 Buttweld Swage Nipple, Werkstoff No 2.4856 Inconel® Alloy Butt weld Eccentric Reducer Traders.

Stainless Steel 304 HARD SOFT Strips course of action solidified steel austenitic, which has at any rate 18% chromium and 8% nickel. Stainless Steel UNS NO 30400 cold rolled half hard Slits has a most outrageous carbon of 0.07% . It is the standard “18/8 unadulterated” that is generally found in dish and cooking contraptions. Werkstoff No 1.4301 HARD SOFT Strips is the most adaptable and for the most part used mix in the solidified steel family. Ideal for a wide combination of home and business applications, Stainless Steel UNS NO 30400 Cold Rolled Slits presentations amazing utilization restriction and has a high effortlessness of creation, striking formability. Werkstoff No 1.4301 hot rolled Strips austenitic treated steels are similarly seen as the most weldable of the high-composite steels and can be welded by all mix and restriction welding frames.

Specification :

Specifications	ASTM B366 / ASME SB366
Dimension Standard	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
ASME B16.9	standard for – Factory-Made Wrought Buttwelding Fittings
ASME B16.25	Buttwelding Ends.
ASME B16.28	standard for – Butt-Welded Short Radius Elbows & Returns Bends
MSS SP-43	Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
Size Range	½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
Seamless Butt Weld Fitting Size	1/2" - 10"
Welded Butt Weld Fittings Size	1/2" - 48"
Thickness	Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Type	Seamless / Welded / Fabricated

Types of Inconel 625 Buttweld Fittings :

ASTM B366 Inconel 625 Concentric Reducer UNS N06625 Concentric Reducer Werkstoff Nr. 2.4856 Concentric Reducer	Afnor Nc22Dnb4M Inconel 625 SCH10 Concentric Reducer EN Nicr22Mo9Nb Inconel 625 SCH20 Concentric Reducer JIS Ncf 625 Concentric Reducer	BS Na 21 Concentric Reducer Gost Хн75Мбтю Concentric Reducer
ASTM B366 Inconel 625 Eccentric Reducer UNS N06625 Eccentric Reducer Werkstoff Nr. 2.4856 Eccentric Reducer	Afnor Nc22Dnb4M Inconel 625 SCH10 Eccentric Reducer EN Nicr22Mo9Nb Inconel 625 SCH20 Eccentric Reducer JIS Ncf 625 Eccentric Reducer	BS Na 21 Eccentric Reducer Gost Хн75Мбтю Eccentric Reducer
ASTM B366 Inconel 625 End Cap UNS N06625 End Cap Werkstoff Nr. 2.4856 End Cap	Afnor Nc22Dnb4M Inconel 625 SCH10 End Cap EN Nicr22Mo9Nb Inconel 625 SCH20 End Cap JIS Ncf 625 End Cap	BS Na 21 End Cap Gost Хн75Мбтю End Cap
ASTM B366 Inconel 625 Equal Tee UNS N06625 Equal Tee Werkstoff Nr. 2.4856 Equal Tee	Afnor Nc22Dnb4M Inconel 625 SCH10 Equal Tee EN Nicr22Mo9Nb Inconel 625 SCH20 Equal Tee JIS Ncf 625 Equal Tee	BS Na 21 Equal Tee Gost Хн75Мбтю Equal Tee
ASTM B366 Inconel 625 Elbow 45 Deg UNS N06625 Elbow 45 Deg Werkstoff Nr. 2.4856 Elbow 45 Deg	Afnor Nc22Dnb4M Inconel 625 SCH10 Elbow 45 Deg EN Nicr22Mo9Nb Inconel 625 SCH20 Elbow 45 Deg JIS Ncf 625 Elbow 45 Deg	BS Na 21 Elbow 45 Deg Gost Хн75Мбтю Elbow 45 Deg
ASTM B366 Inconel 625 Elbow 90 Deg UNS N06625 Elbow 90 Deg Werkstoff Nr. 2.4856 Elbow 90 Deg	Afnor Nc22Dnb4M Inconel 625 SCH10 Elbow 90 Deg EN Nicr22Mo9Nb Inconel 625 SCH20 Elbow 90 Deg JIS Ncf 625 Elbow 90 Deg	BS Na 21 Elbow 90 Deg Gost Хн75Мбтю Elbow 90 Deg
ASTM B366 Inconel 625 Elbow 180 Deg UNS N06625 Elbow 180 Deg Werkstoff Nr. 2.4856 Elbow 180 Deg	Afnor Nc22Dnb4M Inconel 625 SCH10 Elbow 180 Deg EN Nicr22Mo9Nb Inconel 625 SCH20 Elbow 180 Deg JIS Ncf 625 Elbow 180 Deg	BS Na 21 Elbow 180 Deg Gost Хн75Мбтю Elbow 180 Deg
ASTM B366 Inconel 625 Elbow Nipple Fittings UNS N06625 Elbow Nipple Fittings Werkstoff Nr. 2.4856 Elbow Nipple Fittings	Afnor Nc22Dnb4M Inconel 625 SCH10 Elbow Nipple Fittings EN Nicr22Mo9Nb Inconel 625 SCH20 Elbow Nipple Fittings JIS Ncf 625 Elbow Nipple Fittings	BS Na 21 Elbow Nipple Fittings Gost Хн75Мбтю Elbow Nipple Fittings
ASTM B366 Inconel 625 Stub End Fitting UNS N06625 Stub End Fitting Werkstoff Nr. 2.4856 Stub End Fitting	Afnor Nc22Dnb4M Inconel 625 SCH10 Stub End Fitting EN Nicr22Mo9Nb Inconel 625 SCH20 Stub End Fitting JIS Ncf 625 Stub End Fitting	BS Na 21 Stub End Fitting Gost Хн75Мбтю Stub End Fitting
ASTM B366 Inconel 625 Cross UNS N06625 Cross Werkstoff Nr. 2.4856 Cross	Afnor Nc22Dnb4M Inconel 625 SCH10 Cross EN Nicr22Mo9Nb Inconel 625 SCH20 Cross JIS Ncf 625 Cross	BS Na 21 Cross Gost Хн75Мбтю Cross

Equivalent Grade :

Grade	UNS No	Old British		Euronorm		GOST	Japanese JIS
		BS	En	No	AFNOR
Inconel 625	N06625	NA 21	NiCr22Mo9Nb	2.4856	NC22DNB4M	ХН75МБТЮ	NCF 625

Chemical Composition :

Grade		C	Mn	Si	Fe	S	Cr2	Al-Ti	Ni
625	min.	–	–	–	–	–	20.0	–	58.0
625	max.	0.10	0.50	0.50	5.0	0.015	23.0	0.40	–

Elbow Dimensions Standard :

NOMINAL PIPE SIZE	ALL FITTINGS	ALL FITTINGS	ELBOWS AND TEES	180 DEG RETURN BENDS	180 DEG RETURN BENDS	180 DEG RETURN BENDS	REDUCERS	CAPS
NPS	O.D. at Bevel (1), (2)	I.D. at End (1), (3), (4)	Centre -to- End Dimension A, B, C, M	Centre-to- Centre O	Back-to- Face K	Alignment of Ends U	Overall Length H	Overall Length E
½ to 2½	0.06 -0.03	0.03	0.06	0.25	0.25	0.03	0.06	0.12
3 to 3 ½	0.06	0.06	0.06	0.25	0.25	0.03	0.06	0.12
4	0.06	0.06	0.06	0.25	0.25	0.03	0.06	0.12
5 to 8	0.09 -0.06	0.06	0.06	0.25	0.25	0.03	0.06	0.25
10 to 18	0.16 -0.12	0.12	0.09	0.38	0.25	0.06	0.09	0.25
20 to 24	0.25 -0.19	0.19	0.09	0.38	0.25	0.06	0.09	0.25
26 to 30	0.25 -0.19	0.19	0.12	…	…	…	0.19	0.38
32 to 48	0.25 -0.19	0.19	0.19	…	…	…	0.19	0.38

Dimensions Chart of Steel Reducer Fittings :

NOMINAL PIPE SIZE	OUTSIDE DIAMETER		END TO END
Inch	D	P	H
3/4 x 1/2	26.7	21.3	38
3/4 x 3/8	26.7	17.1	38
1 x 3/4	33.4	26.7	51
1 x 1/2	33.4	21.3	51
1 1/4 x 1	42.2	33.4	51
1 1/4 x 3/4	42.2	26.7	51
1 1/4 x 1/2	42.2	21.3	51
1 1/2 x 1 1/2	48.3	42.2	64
1 1/2 x 1	48.3	33.4	64
1 1/2 x 3/4	48.3	26.7	64
1 1/2 x 1/2	48.3	21.3	64
2 x 1 1/2	60.3	48.2	76
2 x 1 1/4	60.3	42.2	76
2 x 1	60.3	33.4	76
2 x 3/4	60.3	26.7	76
2 1/2 x 2	73	60.3	89
2 1/2 x 1 1/2	73	48.3	89
2 1/2 x 1 1/4	73	42.2	89
2 1/2 x 1	73	33.4	89
3 x 2 1/2	88.9	73	89
3 x 2	88.9	60.3	89
3 x 1 1/2	88.9	48.3	89
3 x 1 1/4	88.9	42.2	89
3 1/2 x 3	101.6	88.9	102
3 1/2 x 21/2	101.6	73	102
3 1/2 x 2	101.6	60.3	102
3 1/2 x 1 1/2	101.6	48.3	102
3 1/2 x 1 1/4	101.6	42.2	102
4 x 3 1/2	114.3	101.6	102
4 x 3	114.3	88.9	102
4 x 2 1/2	114.3	73	102
4 x 2	114.3	60.3	102
4 x 1 1/2	114.3	48.3	102
5 x 4	141.3	114.3	127
5 x 3 1/2	141.3	101.6	127
5 x 3	141.3	88.9	127
5 x 2 1/2	141.3	73	127
5 x 2	141.3	60.3	127
6 x 5	168.3	141.3	140
6 x 4	168.3	114.3	140
6 x 3 1/2	168.3	101.6	140
6 x 3	168.3	88.9	140
6 x 2 1/2	168.3	73	140
8 x 6	219.1	168.3	152
8 x 5	219.1	141.3	152
8 x 4	219.1	114.3	152
8 x 3 1/2	219.1	101.6	152
10 x 8	273.1	219.1	178
10 x 6	273.1	168.1	178
10 x 5	273.1	141.3	178
10 x 4	273.1	114.3	178
12 x 10	323.9	273.1	203
12 x 8	323.9	219.1	203
12 x 6	323.9	168.3	203
12 x 5	323.9	141.3	203
14 x 12	355.6	323.9	330
14 x 10	355.6	273.1	330
14 x 8	355.6	219.1	330
14 x 6	355.6	168.3	330
16 x 14	406.4	355.6	356
16 x 12	406.4	323.9	356
16 x 10	406.4	273.1	356
16 x 8	406.4	219.1	356
16 x 6	406.4	168.3	356
18 x 16	457	406.4	381
18 x 14	457	355.6	381
18 x 12	457	323.9	381
18 x 10	457	273.1	381
18 x 8	457	219.1	381
20 x 18	508	457	508
20 x 16	508	406.4	508
20 x 14	508	355.6	508
20 x 12	508	323.9	508
20 x 10	508	273.1	508
20 x 8	508	219.1	508
22 x 20	559	508	508
22 x 18	559	457	508
22 x 16	559	406.4	508
22 x 14	559	355.6	508
22 x 12	559	323.9	508
24 x 10	559	273.1	508
24 x 22	610	559	508
24 x 20	610	508	508
24 x 18	610	457	508
24 x 16	610	406.4	508
24 x 14	610	355.6	508
24 x 12	610	323.9	508
24 x 10	610	273.1	508

Steel Buttweld Fittings Pressure Rating Chart :

NPS (inch)	Pipe Sch.	Wall Thk. (in)	OD (inch)	Temperature
				100	200	300	400	500
				Allowable Stress (Pressure Rating)
				16700	16700	16700	15500	14400
1"	40	0.133	1.315	2205	2205	2205	2047	1902
	80	0.179	1.315	3061	3061	3061	2841	2640
	160	0.250	1.315	4493	4493	4493	4170	3874
1 1/2"	40	0.145	1.900	1629	1629	1629	1512	1404
	80	0.200	1.900	2303	2303	2303	2138	1986
	160	0.281	1.900	3362	3362	3362	3120	2899
2"	40	0.154	2.375	1371	1371	1371	1272	1182
	80	0.218	2.375	1985	1985	1985	1843	1712
	160	0.344	2.375	3283	3283	3283	3047	2831
3"	40	0.216	3.500	1301	1301	1301	1208	1122
	80	0.300	3.500	1844	1844	1844	1712	1590
	160	0.438	3.500	2787	2787	2787	2587	2403
4"	40	0.237	4.500	1102	1102	1102	1023	950
	80	0.337	4.500	1596	1596	1596	1482	1377
	160	0.531	4.500	2611	2611	2611	2424	2552
5"	40	0.258	5.563	965	965	965	896	832
	80	0.375	5.563	1428	1428	1428	1325	1231
	160	0.625	5.563	2474	2474	2474	2296	2133
6"	40	0.280	6.625	877	877	877	814	756
	80	0.432	6.625	1379	1379	1379	1280	1189
	160	0.719	6.625	2382	2382	2382	2211	2054
8"	40	0.322	8.625	771	771	771	716	665
	80	0.500	8.625	1218	1218	1218	1131	1050
	160	0.906	8.625	2298	2298	2298	2133	1982
10"	40	0.365	10.750	699	699	699	649	603
	80	0.594	10.750	1159	1159	1159	1075	999
	160	1.125	10.750	2289	2289	2289	2124	1974

Dimensional Tolerances Of Butt Weld Elbows :

Outside Diameter at Bevel (D)	+ 1.06 - 0.08	1.06	1.06	+ 2.04 - 1.06
Nominal Pipe Size	1/2 to 2½	3 to 3½	4	5 to 8
Center to End LR (A/B)	2	2	2	2
Nominal Pipe Size	10 to 18	20 to 24	26 to 30	32 to 48
Outside Diameter at Bevel (D)	+ 4 - 3.02	+ 6.04 - 4.08	+ 6.04 - 4.08	+ 6.04 - 4.08
Inside Diameter at End	3.02	4.08	+ 6.04 - 4.08	+ 6.04 - 4.08
Center to End 3D (A/B)	3	3	6	6
Center to End LR (A/B)	2	2	3	5
Inside Diameter at End	0.08	1.06	1.06	1.06
Center to End 3D (A/B)	3	3	3	3
Wall Thickness (t)	Not less than 87.05% of Nominal Wall Thickness

Prices of Buttweld Pipe Fittings :

Steel 45 Elbow °
$80.12 - $95.28/ Piece

Steel 90° Elbow
$2.09 - $3.07/ Piece

Steel 180° Elbow
$0.49 - $48.27/ Piece

Steel Equal Tee
$5.89 - $175.32/ Piece

Steel Concentric Reducer
US $1-5 / Piece

Steel Eccentric Reducer
US $0.07 / Piece

Steel LR Elbow
US $0.01-3 / Piece

Steel SR Elbow
US $0.1-0.2 / Piece

Steel End Pipe Cap
US $1-5 / Piece

Steel Stub End
US $ 2.5-50 / Piece

Steel Equal Cross
US $ 1-15 / Piece

Steel Reducing Tee
US $ 1.2 / Piece

Applications :

These material are not a single material but the name for a family of corrosion resistant steels. Like many scientific breakthrough the origins of stainless steel lies in a lucky accident. From the smallest part of zipper to the largest building skyscraper, stainless steel is an essential part of modern life.Stainless steel’s strength, resistance to corrosion and low maintenance make it the ideal material for a wide range of applications. It is also has a long life cycle and is 100% recyclable.

Packaging Used By Us :

We ship our stainless steel metal products in industry leading packaging designed to ensure your order reaches its destination safely. We offer multiple packaging options to meet your specific requirements. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. We pack our goods in numerous ways based on the products. We pack our products in multiple ways.

Testing Used By Us :

To specify the various physical and mechanical properties of the finished product, various tests, both destructive and nondestructive, are performed. Metallurgical, hardness, hardenability, tension, ductility, compression, fatigue, impact, wear, corrosion, creep, machinability, radiography, magnetic particle, ultrasonic, and eddy current are some of the major tests that are performed by quality control personnel. Metallurgical testing is used to determine the quality of steel by analyzing the microstructure of a sample under a microscope. A cross section of a sample is first highly polished and then examined at a magnification from 100-500 diameters. The microstructure of steel consists of grains of different compositions and sizes.

People Also Search For

Export Destinations

Domestic Supply

Altemp® 625, Werkstoff No 2.4856 Nickel Alloy Buttweld Tee, Haynes® 625, Supplier of Inconel® 625 End Cap, Inconel® 625 Reducing Tee Stockholder, Inconel 625 Pipe Elbow Stockists, UNS N06625 Inconel Unequal Tee, 625 Inconel® Alloy B366 Concentric Reducer, 6D, 625 Alloy Fabricated Tee Supplier, Manufacturer of Inconel 625 Eccentric Reducer Traders, Inconel 625 Equal Tee, Inconel Grade in 625 R=1D, ASME B16.28 Inconel Alloy 625 Equal Cross Dealer, 2D, Exporters of Inconel® Alloy 625 Welded Pipe Fittings, Inconel® Unequal Cross Stockholders, MSS-SP-43 625 Short Radius Elbow, Inconel® JIS NCF 625 180 Degree Elbow Traders, ASTM B366 Inconel 625 Stub End Stockists, ASTM B366 Inconel® 625 Butt weld Elbow, GOST ХН75МБТЮ Inconel® 625 Buttweld Reducers, Supplier of Inconel 625 Concentric Reducer, 625 Alloy Pipe Fittings, ANSI B16.9 Inconel 625 SR Elbow, Inconel 625 - UNS N06625 Common Trade Names (Inconel 625®, Nickel Alloy 625 Butt weld Pipe Cross, 10D Butt weld Elbow, SB366 Alloy 625 End Pipe Cap Wholesaler, 625 Inconel 45Deg. Pipe Elbow, Nickelvac® 625, 625 Inconel Reducing Cross Dealers in India, 625 Alloy Butt weld Seamless Pipe Fittings Stockholders, Nickel Alloy 625 Butt Weld Pipe Fittings, 625 Inconel Alloy Buttweld Fittings, Inconel 625 Buttweld Pipe Cap, 3D, 625 Inconel® Alloy Butt weld Pipe Fittings, Alloy 625 90° Degree Elbow, Inconel® Alloy 625 Seamless Pipe Elbow, MSS SP-79 Inconel® 625 LR Elbow, 625 Inconel Butt weld Fittings, 625 Inconel Alloy ASME SB366 Long Radius Elbow, Inconel® 625 Pipe Fittings, Nicrofer® 6020) Cheap Inconel 625 Pipe Fittings, 5D, 8D, Chronin® 625.

Singapore, Jordan, Indonesia, South Africa, Malaysia, South America, Mozambique, Austria, Kuwait, Australia, Trinidad and Tobago, Hong Kong, London, Spain, New Zealand, Ibadan, Durban, Brazzaville, Kolwezi, Brazil, Benin, Maputo, Algiers, Conakry, Maiduguri, Kaduna, Cairo, Sri Lanka, Yaoundé, UK, Peru, Vietnam, Azerbaijan, Austalia, Nigeria, Uganda, Casablanca, Dubai, Mbuji-Mayi, Algeria, Yemen, Nairobi, Lebanon, Angola, Zaria, UAE, Ghana, Mozabique, Colombo, Johannesburg, Canada, Lubumbashi, Ouagadougou, Phillipine, Antananarivo, Chine, Myanmar, Kinshasa, Mogadishu, Addis Ababa, Abidjan, Tripoli, Cape Town, Dar es Salaam, Russia, Giza, Pretoria, Morocco, Africa, Port Elizabeth, Luanda, Bahrain, United States, Accra, Port Harcourt, Houston, Alexandria, Oman, Sudan, Turkey, Fez, Ethiopa, Freetown, Douala, Khartoum, Germany, Subra al-Haymah, Cyprus, Thailand (Bangkok), Iran, Israel, Mexico, Tunisia, Qatar, Bangladesh, Dakar, Lagos, Rabat, Abu Dhabi, Bamako, Colombia, Omdurman, Kampala, Bulawayo, Kano, Kazakhstan, Argentina, Saudi Arabia, Italy, Cameroon, Egypt, Jordon, Iraq, Venezuela, Harare, Soweto, Netherland, New York.

Amritsar, Gulbarga, Kerala, Kota, Andhra Pradesh, Delhi, Maharashtra, Pune, Bundi, Gorakhpur, Dombivali, Kasganj, Betul, Kolkata, Aurangabad, Vadodara, Durgapur, Punjab, Jabalpur, Tripura, Mizoram, Ballia, Tadepalligudem, Orissa, Amravati, Jaipur, Vijayawada, Gwalior, Pimpri and Chinchwad, Chandigarh, Siliguri, Gujarat, Bihar, Haryana, Manipur, Baraut, Nashik, Meerut, Allahabad, Coimbatore, Gujarat, Navi Mumbai, Bhadreswar, Bikaner, Saharanpur, Madurai, Visakhapatnam, Ambattur, Ludhiana, Kurnool, Dhanbad, Jharkhand, Ajmer, Benin, Kolapur, Chhattisgarh, Guntur, Bhavnagar, Vasai, India, Nagapattinam, Waghala, Ranchi, Akola, Kalyani, Ulhasnagar, Nagpur, Virar, Assam, Indore, Ujjain, Uttar Pradesh, Buxar, Loni, Thane, Dehradun, Nanded, Jhansi, Ghaziabad, Tamil Nadu, West Bengal, Ahmedabad, Blair, Mumbai, Karnataka, Sadar, Bangalore, Hubli and Dharwad, Tirunelveli, Solapur, Bhopal, Rajasthan, Lucknow, Chennai, Jodhpur, Muktsar, Mangalore, Udgir, Bansberia, Srinagar, Nagda, Miryalaguda, Surat, Suryapet, Guwahati, Patna, Agra, Rajkot, Madhya Pradesh, Hyderabad, Faridabad, Kalyan, Jamalpur, Puducherry, Kanpur, Varanasi, Jamnagar, Nagaur, Hinganghat, Datia, Haora, Bhiwadi, Belgaum, Port, Banswara, Raipur, Ambala, Asansol.

Table of Content